NEUMANN U 47 FET CONDENSER MICROPHONE COLLECTOR’S EDITION
-1%

NEUMANN U 47 FET CONDENSER MICROPHONE COLLECTOR’S EDITION

0 Reviews Sold: 0

336,100

SPECIFICATIONS:

  • Acoustical operating principle: Pressure gradient transducer
  • Directional pattern: Cardioid
  • Frequency range: 40 Hz to 16 kHz
  • Sensitivity at 1 kHz into 1 kOhm: 8 mV/Pa
  • Rated impedance: 150 Ohms
  • Rated load impedance: 1000 Ohms
  • Signal-to-noise ratio, CCIR (rel. 94 dB SPL): 69 dB
  • Signal-to-noise ratio, A-weighted (rel. 94 dB SPL): 76 dB
  • Equivalent noise level, CCIR: 25 dB
  • Equivalent noise level, A-weighted: 18 dB-A
  • Max SPL for THD < .5%: 137 dB
  • With preattenuation: 147 dB
  • Max output voltage for THD <0.5%: -3.3 dBu
  • Power Supply (P48, IEC 61938): 48 V ± 4 V
  • Current consumption (P48, IEC 61938): 0.5 mA
  • Weight: 710 g
  • Dimensions: 63 x 160 mm

336,100

Add to cart
Buy Now
SKU: NM-004 Category: Tags:

PRODUCT DESCRIPTION

The Neumann U 47 FET Collector’s Edition brings back the unmistakable sound of Neumann’s iconic U 47 FET for the first time in over 45 years. Featuring FET 80 circuitry and a K 47 double large-diaphragm capsule, the U 47 FET painstakingly recreates the original specifications of the original U 47 FET down to the very last detail. This collection includes a wooden box, certificate, and operating manual.

THE RETURN OF A CLASSIC

The Neumann U 47 is one of the most beloved microphones of all time. Equipped with extremely pricey custom VF 14 tubes, Neumann halted production on the U 47 in 1965. A few years later, Neumann released the U 47 FET, a solid-state version of the U 47 designed to recapture the sound of the original. Thanks to its FET circuitry, the U 47 FET can handle much higher sound pressure levels than any tube mic available, allowing engineers to close-mic loud guitar amplifiers, bass amplifiers and kick drums.

ALL ORIGINAL PARTS

In order to recreate the sound of the original U 47 FET, Neumann has built the U 47 FET using the original production schematics. The U 47 FET uses FET 80 circuitry—the same technology found in the famous U 87—to achieve a particularly wide dynamic range, making it the perfect solution for miking loud sources.

The U 47 FET is also equipped with the K 47 double large-diaphragm capsule, which was used in the original tube version of the U 47. This color capsule provides an even, balanced tone with a slight boost above 2 kHz that makes the midrange of any instrument sing.

TONE-SHAPING FEATURES

The U 47 FET features a selectable low-cut filter to combat proximity effect when close-miking vocals or amplifiers. Switchable attenuation allows you to record even the loudest guitar amps without unwanted distortion. The fixed cardioid polar pattern and swivel-mounted bracket make recording vocals with the U 47 FET a breeze.

PRODUCT SPECIFICATIONS

CONDITION New
PACKAGE CONTENTS U 47 FET Microphone, wooden box, certificate, and operating manual
LENGTH 160 mm
DIAMETER 63 mm
UNIT WEIGHT 710 g
TUBE OR SOLID STATE Solid State
TRANSDUCER TYPE Condenser
POLAR PATTERN Cardioid
NUMBER OF MICROPHONES Single Microphone
IMPEDANCE Rated: 150 Ohms / Rated load: 1 kOhm
FREQUENCY RANGE 40 Hz – 16 kHz
INPUT_PAD -10 dB
SENSITIVITY -41.9 dBV/Pa (8 mV)
MAX. SPL 137 dB; 147 dB with pad

Reviews

There are no reviews yet.

Be the first to review “NEUMANN U 47 FET CONDENSER MICROPHONE COLLECTOR’S EDITION”

Your email address will not be published.